- Lumber Tycoon 2 Wiki
- Gold Wood
- Gold Wood
- Location
- Hardness
- Average Growth Time
- Characteristics [ ]
- Harvesting [ ]
- Lumber Tycoon 2 Wiki
- Snowglow Wood
- Snowglow Wood
- Location
- Hardness
- Average Growth Time
- Contents
- Characteristics
- Harvesting
- Firewood
- Glitches
- Lumber Tycoon 2 Wiki
- Neon Wires
- Neon Wires
- Type
- Location
- Cost
- Usage
- Contents
- Design [ ]
- Pink Neon Wire [ ]
- History [ ]
- Lumber Tycoon 2 Wiki
- Neon Wires
- Neon Wires
- Type
- Location
- Cost
- Usage
- Contents
- Design [ ]
- Pink Neon Wire [ ]
- History [ ]
Lumber Tycoon 2 Wiki
Join the Wiki’s Discord server to talk to 10,000+ fans, get game support, trade, and more!
Gold Wood
Gold Wood
Location
Hardness
Average Growth Time
Log | Plank |
---|---|
$5.7 | $36 |
Gold Wood is a common wood type located in the Swamp, along with Zombie Wood. It is slightly worth more than Lava Wood, but the time-consuming traveling to get Gold Wood deters most players from getting it and instead harvesting Lava Wood or Frost Wood. It was added on August 28, 2015.
Characteristics [ ]
The tree does not grow any leaves, commonly assumed to be fully grown or dead. It grows fairly tall, with branches spreading narrow. On fully grown trees, there may be extremely tiny branches, which forces players to configure their sawmill’s cross-section setting to be small to process these sections. The exterior is dark brown, with the interior being bright gold.
It is noted that trees spawning within the Swamp have a large fluctuation, making trees larger among others. It can also be seen growing through the walls surrounding the swamp.
Harvesting [ ]
It is recommended to have a Overgrown Axe, if otherwise not owned then a Silver Axe, The Many Axe, or any other efficient axe to chop it. A Sawmax 01 or better is recommended to process all of the tree.
Using the Rock Bridge is the recommended route to getting to the Swamp, however, this requires the player to have Dynamite along with them. A more in-depth guide can be seen here. The Safari Mountain Passage can also be used to enter the Swamp but is less efficient due to not being able to bring a vehicle to haul chopped trees. Other methods can include long planking up the mountain or using door bridges.
Источник
Lumber Tycoon 2 Wiki
Join the Wiki’s Discord server to talk to 10,000+ fans, get game support, trade, and more!
Snowglow Wood
Snowglow Wood
Location
Hardness
Average Growth Time
Snowglow Wood, commonly called Glowing Fir Wood, is a variant of wood that was introduced during Roblox’s «Winter Games 2017» Event and was removed after the event concluded. It was then added back to the memorial for Ticktatwert, inside the River Tunnel.
This wood type is mostly used for selling or trading among players or filling blueprints due to its unique color and difficulty to get.
Contents
Characteristics
Snowglow Wood has a neon yellow texture for its bark. On the inside, it has a smooth yellow plastic texture. The leaves are yellowish and are quite large when the tree has matured. The leaves are made up of a slate material, instead of the regular grass material.
Its logs glow similarly to the Cavecrawler Wood and Sinister Wood, but the glowing attribute does not apply to the plank texture. The Snowglow tree’s growth pattern is very similar to the Cherry Tree’s growth pattern. It also has the shape of an Elm Wood tree. Like Cavecrawler trees, Snowglow wood will turn an unsaturated blue neon color when the tree dies.
The wood itself is relatively easy to cut, with most logs needing about 3 chops using a Rukiryaxe. The logs are roughly uniform in size and do not possess any significant variation, similar to the Elm Wood tree.
The planks are the same color as the box of the Wobblebobble and the boxed version of the Basic Hatchet. It does not glow like its log form, however.
Harvesting
Snowglow trees were located in the Taiga, and could easily be cut with any Axe. Players did not have to bring dynamite to the Taiga, as the entrance to the Taiga had been temporarily opened for the event by the Taiga Scaffold to «block» any rocks produced by Snow Cave.
However, since they were added back for the memorial for Ticktatwert (located in the River Tunnel), this wood can be harvested again. But, since there are no nearby ways to easily access the River Tunnel. Bringing this illusive wood onto the surface, requires a lot of patience, or a lot of time on your hands.
One way to obtain the wood would be to lower the Bridge with the Preserved Enlarged Ostrich Eye and putting the tree right in the water wall in the Bridge hole, then waiting for the Bridge to come up and drop the tree onto it. This is a very difficult and expensive method, however.
Players can also carry these logs out one-by-one by grabbing onto a log and jumping out of their vehicle while it is underwater, which will usually catapult them into the air and with the wood in hand if they are lucky.
Firewood
When a piece of Snowglow Wood was deposited and processed at the Winter Cabin, it converts it into a piece of Firewood that spawns at the top of the chimney and drops to the bottom of the fireplace. Firewood is a tiny log strip that emits fire particles and is not intractable (which means that Sawmills, Chop Saws, and Axes will have no effect on these) but can be moved using a log and dynamite. It has the normal plank texture and is a lighter shade of yellow than the regular plank version of Snowglow Wood.
They never despawn, so in a public server that has been up for a while, there tend to be tons of Firewood located all over the floor inside of the cabin’s interior and the cabin’s porch from all the Snowglow Wood processed on that server.
Glitches
During the event, a glitch occurred that if the cabin was already filled, there was a chance that with only one piece a player could obtain the badge and the Skiipack. Also, when a player dropped off the Snowglow Wood at the Snowglow Bin, it will not process, and the meter will not move up. There was no known way to fix it until the end of the event.
On March 8, 2017, a glitch occurred which caused the wood to return, along with setting everyone’s saved money to $20,000,000. This issue was repaired and saves were set to how they were prior to the glitch.
Wood |
Common | Oak • Cherry • Elm • Birch • Lava • Walnut • Koa • Fir • Pine • Gold • Zombie • Frost • Cavecrawler |
---|---|
Rare | Palm • Spook • Sinister • Phantom • Snowglow |
Misc. | Test • Grey • Pink |
Источник
Lumber Tycoon 2 Wiki
Join the Wiki’s Discord server to talk to 10,000+ fans, get game support, trade, and more!
Neon Wires
Neon Wires
Type
Location
Cost
Usage
«For all your (color) neon needs.» |
Neon Wire is a type of wire that functions as a light source and decoration. All colors can be bought from Link’s Logic for $720 Money, with the exception of the Pink Neon Wire.
Contents
Design [ ]
Neon Wires are thicker than regular wires and can stretch up to 16 units in length, shorter than the 20 unit length of regular wires. When activated, Neon Wires will illuminate their respective color, and when deactivated, they will be jet black, much darker than regular wires. There are eight variants of Neon Wires: Red, Orange, Yellow, Green, Cyan, Blue, Violet, and White, each in their respective neon colors.
Pink Neon Wire [ ]
The Pink Neon Wire is an unreleased variant of Neon Wires with the part color being Hot Pink. Its color is very similar to the Violet Neon Wire, although its luminance is much higher.
This wire was likely going to function the same as all other Neon Wires. This wire is assumed to be discontinued, much like the Magenta Icicle Lights. However, Pink Neon Wires and Magenta Icicle Lights were once obtainable via exploits, much like the boxed End Times Axe.
It was assumed that the Pink Neon Wire would eventually be added to the game. However, this is now very unlikely due to how much time has passed since the release of the current Neon Wires.
History [ ]
Neon Wires were added to the game on August 26 th , 2016. Before their addition, Defaultio tweeted a teaser photos showcasing the wires in a zig-zag pattern. The wires were added to Link’s Logic 11 hours later.
Источник
Lumber Tycoon 2 Wiki
Join the Wiki’s Discord server to talk to 10,000+ fans, get game support, trade, and more!
Neon Wires
Neon Wires
Type
Location
Cost
Usage
«For all your (color) neon needs.» |
Neon Wire is a type of wire that functions as a light source and decoration. All colors can be bought from Link’s Logic for $720 Money, with the exception of the Pink Neon Wire.
Contents
Design [ ]
Neon Wires are thicker than regular wires and can stretch up to 16 units in length, shorter than the 20 unit length of regular wires. When activated, Neon Wires will illuminate their respective color, and when deactivated, they will be jet black, much darker than regular wires. There are eight variants of Neon Wires: Red, Orange, Yellow, Green, Cyan, Blue, Violet, and White, each in their respective neon colors.
Pink Neon Wire [ ]
The Pink Neon Wire is an unreleased variant of Neon Wires with the part color being Hot Pink. Its color is very similar to the Violet Neon Wire, although its luminance is much higher.
This wire was likely going to function the same as all other Neon Wires. This wire is assumed to be discontinued, much like the Magenta Icicle Lights. However, Pink Neon Wires and Magenta Icicle Lights were once obtainable via exploits, much like the boxed End Times Axe.
It was assumed that the Pink Neon Wire would eventually be added to the game. However, this is now very unlikely due to how much time has passed since the release of the current Neon Wires.
History [ ]
Neon Wires were added to the game on August 26 th , 2016. Before their addition, Defaultio tweeted a teaser photos showcasing the wires in a zig-zag pattern. The wires were added to Link’s Logic 11 hours later.
Источник