Модель дерева для ревит
Product Version: Unknown
Product Version: Unknown
Parametric. We use this object in Wharf. I make it, cause I’am a civil engineer who always build wharf or jetty that use that object
Product Version: Revit Building 9.1
Wicker table with a glass top for the beach
Product Version: Revit Building 8
Modeled after GearGrid 20″x20″ wall mounted locker.
Product Version: Revit Architecture 2009
Coalesse — Metro -TOPO
TOPO is a furniture system with the flexibility to fit how and where you work — for the open plan and private office.
Product Version: Revit Architecture 2009
Coalesse — Denizen
A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be.
Product Version: Revit Architecture 2009
Parametric family with constraints to adjust Overhang, baluster spacing, height, and Numbers.
Product Version: Revit Architecture 2009
Redone version of one already posted to allow for material change.
Product Version: Revit Architecture 2011
Soda Dispenser with Ice Maker
Product Version: Revit Architecture 2011
Generic Roof Top Unit, fully parametric to define height of curb, size of RTU, etc. My first upload. I know it’s not much, but perhaps it is useful to somebody.
Product Version: Revit Architecture 2012
Following the edge of architectural trend edge, the SlimBoy luxury hammock is made with all marine grade materials including acrylic canvas and stainless steel. This high end piece will fit any architectural design and most corporate languages.
You may purchase the SlimBoy Luxury Hammock at www.slimboycr.com info@slimboycr.com
Product Version: Revit Architecture 2009
Product Version: Unknown
This is road Walkway Edge, used railing profile,
Product Version: Revit Building 9
Typical parameters including length / height / materials
Product Version: Revit Architecture 2015
2-Gang Outlet (w/ electrical conduit connector)
Product Version: Revit Architecture 2017
garden ferniture, small wooden bridge
Product Version: Unknown
Product Version: Unknown
Double swing kitchen door
Product Version: Revit Architecture 2008
Product Version: Revit Architecture 2008
Modeled after GearGrid 20″x20″ wall mounted locker. This one is for an end locker. Has wire grid on both sides
Product Version: Revit Architecture 2009
Product Version: Revit Architecture 2009
Product Version: Revit Architecture 2009
Coalesse — Metro -TOPO
TOPO is a furniture system with the flexibility to fit how and where you work — for the open plan and private office.
Product Version: Revit Architecture 2009
Coalesse — Denizen
A collection of modern casegoods that fit as easily in home as office settings and a new way of thinking about how the traditional office should be.
Product Version: Revit Architecture 2009
direct set trapezoidal window. full parameters: height, width & top slope [top slope of trapezoid defined by roof slope (6:12, 9:12, etc)].
Product Version: Revit Architecture 2011
Hi, cos i couldn’t find any fold up door family, so i made this one myself, hope it can help anyone
Product Version: Revit MEP 2011
Product Version: Unknown
Fully Parametric Blinds. You Can adjust everything.
Product Version: Revit Architecture 2014
Pretty close but not an exact replica of actual house.
FOLLOW ME ON INSTAGRAM FOR MORE RENDERINGS: @dandeod
Product Version: Unknown
Источник
Revit plant families
Green spaces attract the eyes of spectators – it is naturally human to love green décor. As to offer more choice in these families, Revit has produced over 300+ Plant families for your design projects.
It is true that just a minority of designers are reputed to use Revit plants, partially due to the fact that some designers and architects do not use Revit for visualization and rendering purposes. However, since we attempt to diversify our collection of families, we released Plant families for a free download – just click the link below and you’ll receive the whole family in one piece.
In this section you will find the following types of plants:
- Revit indoor plant families
- Revit 3D plant families
- Revit pot plant families
- Revit trees
- Revit planter
- Potted plants
- Revit flowers
- Revit bushes
- Revit shrubs
- Realistic trees
We also offer Revit landscape families, check it out below!
In addition, you will also find vase and decoration families here. It is all stored below and available for a quick download!
In case of questions or queries, please submit them over our contact page. If you have some interesting ideas, we are always there to assist you in your projects!
Revit 3D plant families
| 2D Tree Plan parametric Detail Item
| 3D 3d tree
| 3D Bush
| 3D Ceramic planter
|
| 3D Flower basket
| 3D Flower in vase
| 3D Flowers and vase
| 3D Hanging Plant
|
| 3D Hanging Plant 2
| 3D 2D TRESS 2789
| 3D tree 2767
| 3D Large Tree
|
| 3D Leopard tree
| 3D Lily plant
| 3D Modern Plant Box
| 3D Plant Bonzai
|
| 3D Plant Bonzai 2
| 3D Plant Bonzai 3
| 3D Plant Bonzai 4
| 3D Plant Table
|
| 3D Planter with shrub
| 3D Planting trough
| 3D Planting
| 3D Planting – Solid and RPC 16077
|
| 3D Planting Graphic – Complex 15925
| 3D Potted Plant
| 3D Potted Plant 10
| 3D Potted Plant 11
|
| 3D Potted Plant 12
| 3D Potted plant 2
| 3D Potted Plant 3
| 3D Potted Plant 4
|
| 3D Potted Plant 5
| 3D Potted Plant 6
| 3D Potted Plant 7
| 3D Potted Plant 8
|
| 3D Potted Plant 9
| 3D Round plant pot
| 3D Scotch pine tree
| 3D Table Decoration
|
| 3D Table Decoration 2
| 3D Table Decoration 3
| 3D Table Decoration 4
| 3D Vase (2)
|
| 3D Vase
| 3D Vertical Garden Wall
|
Revit 2D plant families
| 2D Tree – Elevation 1
| 2D Tree – Elevation 10
| 2D Tree – Elevation 11
| 2D Tree – Elevation 12
|
| 2D Tree – Elevation 13
| 2D Tree – Elevation 14
| 2D Tree – Elevation 2
| 2D Tree – Elevation 3
|
| 2D Tree – Elevation 4
| 2D Tree – Elevation 5
| 2D Tree – Elevation 6
| 2D Tree – Elevation 7
|
| 2D Tree – Elevation 8
| 2D Tree – Elevation 9
| 2D Tree – Plan 1
| 2D Tree – Plan 10
|
| 2D Tree – Plan 11
| 2D Tree – Plan 12
| 2D Tree – Plan 13
| 2D Tree – Plan 2
|
| 2D Tree – Plan 3
| 2D Tree – Plan 4
| 2D Tree – Plan 5
| 2D Tree – Plan 6
|
| 2D Tree – Plan 7
| 2D Tree – Plan 8
| 2D Tree – Plan 9
| 2D Tree
|
| 2D Tree 2d
| 2D Tree elevations
| 2D Tree Elevation Parametric Scale with Height
| 2D Tree plans
|
Other plant families
Deciduous – Large – Beech, Deciduous – Large – Oak, Skinny, Deciduous – Large – Oak, Wide, Deciduous – Med – Ash, Deciduous – Med – Birch, Deciduous – Med – Honey Locust, Deciduous – Small – Apple, Deciduous – Small – Blueberry, Deciduous – Small – Cherry, Deciduous – Small – Serviceberry, a_tree35, a_tree49
a_bush12, Grass, kvitnik, palm, Plant, Plant_8135, RPC_Plant_-_Tropical, RPC_Tree_-_Fall, Shrub, Sitka_Spruce, yucca
Other Revit Families
- Decorative fence, single section.
- Revit column families download
- Revit door families
- Revit doors families (part 2)
- Revit elevator & escalator families
- Revit families from our visitors
- Revit furniture families
- Revit IKEA families download
- Revit kitchen families
- Revit Lighting Families
- Revit MEP families
- Revit office furniture families
- Revit people families download
- Revit plant families
- Revit Railing And Fence Families
- Revit sink families download
- Revit sofas families download
- Revit stairs families
- Revit toilet families download
- Revit vehicle families download
- Revit window families
- Revit window families set 2
Источник
Модель дерева для ревит
Product Version: Revit Architecture 2017
Distance from ceiling and materials — parametric.
Product Version: Revit Architecture 2013
Product Version: Revit Building 9.1
An advanced pool that was created in Revits Architecture 09′
Product Version: Revit Architecture 2009
Product Version: Unknown
Product Version: Unknown
Product Version: Unknown
Product Version: Unknown
GLASS TABLES WITH CHAIRS
Product Version: Unknown
Here’s an updated version of the box of doughnuts with the right size and measurments for use!
I’ll be design more components!
Product Version: Revit Structure 2017
Product Version: Unknown
Product Version: Unknown
All four items in picture are separate families here in Revit City.
Product Version: Revit Architecture 2020
All four items in picture are separate familes here in Revit City.
Suits NSW Govt. requirements
Product Version: Revit Architecture 2020
All four items in picture are separate items here in Revit City.
Suits NSW Govt. requirements
Product Version: Revit Architecture 2020
All four items in picture are separate items here in Revit City.
Suits NSW. Govt requirements
Product Version: Revit Architecture 2020
Power Transformer designed carefully to siute your project.
Product Version: Revit Architecture 2009
I make this object for break waves, cause we have more than 18.000 islands. Surya Consultant, Tual, Maluku Tenggara, Indonesia..
Product Version: Revit Architecture 2008
This object is useful for break waves..Work Plane Based. Surya Consultant, Tual
Product Version: Revit Architecture 2008
Product Version: Revit Architecture 2015
First, thanks to revity city user @clars for uploading this and I used it to modify to armless model in David Edwards ‘Lolita’ collection. Dimensions pretty much match with original but not parametric. The model has two fabric texture. Modify as needed .
Product Version: Revit Architecture 2013
Product Version: Revit Architecture 2011
One of my components completely done for me.
Product Version: Revit Architecture 2011
Product Version: Revit Architecture 2015
Product Version: Revit Architecture 2015
7 3/4″ x 7 3/4″ x 3 1/8″ — Parametric
Product Version: Unknown
Product Version: Revit Architecture 2009
Product Version: Revit Architecture 2009
Typical Gable-end Truss w/ top-chord offset to allow for rake extensions. No webs shown (Manufacturer designs that not architects). Variable chord sizing, slope, bearing length & overhang length. See also «06 — Truss — Fink- No Web».
Product Version: Unknown
Typical Truss w/out webbing showing (Manufacturer designs that not architects). Variable slope, chord size, bearing length & overhang length. See also «06 — Truss — Fink Gable — No Web»
Product Version: Unknown
Источник
Модель дерева для ревит
Product Version: Revit Architecture 2017
Distance from ceiling and materials — parametric.
Product Version: Revit Architecture 2013
Product Version: Revit Building 9.1
An advanced pool that was created in Revits Architecture 09′
Product Version: Revit Architecture 2009
Product Version: Unknown
Product Version: Unknown
Product Version: Unknown
Product Version: Unknown
GLASS TABLES WITH CHAIRS
Product Version: Unknown
Here’s an updated version of the box of doughnuts with the right size and measurments for use!
I’ll be design more components!
Product Version: Revit Structure 2017
Product Version: Unknown
Product Version: Unknown
All four items in picture are separate families here in Revit City.
Product Version: Revit Architecture 2020
All four items in picture are separate familes here in Revit City.
Suits NSW Govt. requirements
Product Version: Revit Architecture 2020
All four items in picture are separate items here in Revit City.
Suits NSW Govt. requirements
Product Version: Revit Architecture 2020
All four items in picture are separate items here in Revit City.
Suits NSW. Govt requirements
Product Version: Revit Architecture 2020
Power Transformer designed carefully to siute your project.
Product Version: Revit Architecture 2009
I make this object for break waves, cause we have more than 18.000 islands. Surya Consultant, Tual, Maluku Tenggara, Indonesia..
Product Version: Revit Architecture 2008
This object is useful for break waves..Work Plane Based. Surya Consultant, Tual
Product Version: Revit Architecture 2008
Product Version: Revit Architecture 2015
First, thanks to revity city user @clars for uploading this and I used it to modify to armless model in David Edwards ‘Lolita’ collection. Dimensions pretty much match with original but not parametric. The model has two fabric texture. Modify as needed .
Product Version: Revit Architecture 2013
Product Version: Revit Architecture 2011
One of my components completely done for me.
Product Version: Revit Architecture 2011
Product Version: Revit Architecture 2015
Product Version: Revit Architecture 2015
7 3/4″ x 7 3/4″ x 3 1/8″ — Parametric
Product Version: Unknown
Product Version: Revit Architecture 2009
Product Version: Revit Architecture 2009
Typical Gable-end Truss w/ top-chord offset to allow for rake extensions. No webs shown (Manufacturer designs that not architects). Variable chord sizing, slope, bearing length & overhang length. See also «06 — Truss — Fink- No Web».
Product Version: Unknown
Typical Truss w/out webbing showing (Manufacturer designs that not architects). Variable slope, chord size, bearing length & overhang length. See also «06 — Truss — Fink Gable — No Web»
Product Version: Unknown
Источник